Russell Hobbs Air Leak in Seals or Cracked Dust Bin

Vacuum runs but makes a loud high-pitched whistling noise

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Damaged dust bin gasket, Cracked dust container, Misaligned cyclone assembly, Loose connection between main body and wand

How to Fix / Troubleshooting

Safety first: Turn off the vacuum and remove the battery.

Locate the leak:

  • Assemble the vacuum and run it briefly while listening closely (keep hair and clothing away from moving parts). Note where the whistling is loudest.
  • Inspect the dust bin rim and the rubber gasket that seals it to the main body. Look for tears, flattening, or missing sections.
  • Check the dust bin and cyclone housing for hairline cracks by holding them up to a bright light.
  • Ensure the bin is fully latched and the cyclone is seated correctly.
  • If the gasket is damaged or the bin is cracked, replace the dust bin assembly or gasket as a unit.

Warning: Do not use tape as a permanent repair on high-suction areas; it can detach and be sucked into the motor.

Advertisements

Repair Difficulty

Medium 3/5

Required Part

Dust Bin Assembly
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements