Oven door remains locked after self-cleaning or pyrolytic cycle, cannot open door

Safety first: Ensure the oven has cooled completely. Disconnect power at the breaker before attempting to release the lock manually.

• Allow full cooling: Some Sauter models keep the door locked until the cavity temperature drops below a safe threshold. Wait at least 1–2 hours after a pyrolytic cycle.
• Try power reset: Turn off the breaker for 5 minutes, then restore power to reset the control board. Attempt to cancel the cleaning cycle and unlock the door via the control panel.
• Manual release: If still locked, remove the top cover of the oven (after disconnecting power). Locate the door lock assembly at the front. Use the manual release lever or gently move the lock mechanism to open the door.
• Inspect lock assembly: Check the lock motor, latch, and microswitches for heat damage or mechanical failure. Test the microswitches with a multimeter for proper open/closed operation.
• Replace faulty parts: Install a new door lock assembly or lock motor if components are damaged or not operating correctly.
• Test operation: Reassemble, restore power, and run a short cleaning or lock test to confirm the door locks and unlocks properly.