Robot mower is cutting outside the intended lawn area or entering flower beds.

Safety first: Turn off the mower and unplug the charging station before adjusting the boundary wire.

• Verify wire distance: Measure the distance from the boundary wire to the lawn edge. Adjust to AL-KO's recommended spacing (often 20–35 cm depending on edge type).
• Secure wire: Use additional pegs to secure the wire, especially near slopes and edges where it may move.
• Check connections: Ensure the boundary wire ends are correctly connected to the designated terminals on the charging station.
• Avoid interference: Keep the boundary wire away from metal fences, buried cables, or other robotic mower wires that can distort the field.
• Test perimeter: Run a perimeter test mode if available to confirm the mower follows the boundary correctly.