Flymo
Boundary Detection Failure
Robot mower leaves the lawn and travels into flower beds or over paths without stopping.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Boundary wire broken or disconnected, Boundary wire laid incorrectly, Faulty loop receiver in mower, Strong external interference masking loop signal
How to Fix / Troubleshooting
Safety first: Immediately turn OFF the mower and return it to the lawn area.
- Inspect boundary layout: Walk the entire perimeter and confirm the wire is continuous, correctly pegged, and not crossing itself.
- Check station LED: Ensure the charging station indicates a healthy loop. If not, locate and repair any breaks using Flymo‑approved connectors.
- Test in a known area: Place the mower near the boundary and start it. If it still crosses the wire, the internal loop receiver or electronics may be faulty.
- Reduce interference: Move any nearby electric fences or high‑current cables away from the boundary wire if possible.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements