Robomow
Perimeter Detection Failure
Robomow leaves the lawn area and crosses the perimeter wire boundary.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Perimeter wire buried too deep or broken, Base station signal too weak, Faulty perimeter receiver in mower, Strong interference from other systems
How to Fix / Troubleshooting
Safety first: Turn OFF the mower before adjusting the perimeter wire.
- Check wire depth: Ensure the perimeter wire is at the recommended depth (usually on the surface or shallowly pegged). Deep burial can weaken the signal.
- Inspect for breaks: Walk the perimeter and look for damage. Repair any cuts with proper connectors.
- Verify base station operation: Confirm the base station LED indicates a healthy perimeter signal.
- Reduce interference: Keep the perimeter wire away from other buried cables and metal fences where possible.
- Test with small loop: Create a small test loop and see if the mower respects the boundary. If it still crosses, the perimeter receiver in the mower may be faulty.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Perimeter Receiver Module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements