Robot mower does not return to the charging base and stops in the lawn with low battery.

Safety first: Turn OFF the mower before moving the charging base.

Steps to check:

• Base placement: Ensure the Worx charging base is on level ground with a straight boundary wire approach of at least the distance specified in the manual.
• Wire routing: Confirm the boundary wire passes under and behind the base exactly as shown in the installation guide.
• Clear path: Remove obstacles or narrow passages near the base that could block the mower's approach.
• Test homing: Start a manual return-to-base command and watch the mower's path. Adjust base position if it consistently misses.

When to call a technician: If the mower cannot home correctly with a proper installation, the homing logic or sensors may require professional diagnosis.