Little Swan
Overheating Electrical or Mechanical Component
Washer emits a burning smell during operation.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Drive belt slipping on pulley, Foreign object stuck between drum and tub, Overheating motor, Loose electrical connection arcing
How to Fix / Troubleshooting
Safety first: Immediately stop the washer, unplug it, and do not continue using it until the source is identified.
- Inspect drum and gasket: Look for trapped items (e.g., plastic, rubber) between the drum and door gasket that may be rubbing.
- Check drive belt: Remove the rear panel and inspect the belt for glazing or burning. Replace if damaged and ensure pulleys turn freely.
- Smell near motor and PCB: Carefully sniff near the motor and control board (with power off). A strong burnt electronics smell suggests component failure requiring replacement.
- Do not ignore: If you cannot locate a simple mechanical cause, contact a qualified technician. Continuing to run the washer may cause fire or further damage.
Advertisements
Repair Difficulty
Hard
4/5
Advertisements