Black+Decker
Condenser Fan Not Running
Condenser fan at the rear does not spin, but the compressor runs and the unit overheats or shuts down.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed condenser fan motor, Seized fan bearings, Faulty fan capacitor, Loose or broken fan wiring
How to Fix / Troubleshooting
Safety: Unplug the unit. Do not attempt to spin the fan while the unit is powered.
- Spin test: With power disconnected, try to spin the condenser fan blade by hand. If it is stiff or stuck, the motor is likely bad.
- Inspect wiring: Check the fan motor wires and connector for damage or looseness. Repair or reseat as needed.
- Capacitor check: Locate the fan capacitor and inspect for bulging or leaks. Replace with the same rating if defective.
- Replace motor: If the fan still does not run with a good capacitor and wiring, replace the condenser fan motor with a Black+Decker-compatible unit.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Condenser Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements