Danby
Control Logic / Interference Fault
Unit turns on and off by itself or changes settings without input.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Stuck keypad buttons, Moisture on control board, Electrical interference from other devices, Faulty main PCB
How to Fix / Troubleshooting
Steps:
- 1. Isolate power: Plug the unit directly into a wall outlet, not a shared power strip with other large appliances.
- 2. Inspect keypad: Check for stuck or damaged buttons on the control panel. Clean around buttons with a slightly damp cloth and dry thoroughly.
- 3. Moisture check: Remove the control panel cover and inspect for condensation or water on the PCB. Dry gently and allow to air out before reassembly.
- 4. Remote interference: Ensure no other remotes or IR devices are inadvertently sending signals.
- 5. Replace control board: If random behavior persists, replace the display/control board or main PCB as appropriate.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Display / Keypad Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements