Electrolux Bottom Tray Full / High Water Level

Portable AC shows P2 and stops cooling

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Clogged internal drain path, Blocked bottom tray sensor, Excessive humidity causing rapid water accumulation, Faulty water level sensor

Safety: Unplug the unit before tilting or draining.

Steps:

Drain water: Use the lower drain outlet to fully drain the internal tray into a shallow pan.
Clean drain path: Remove panels as per manual and clean any slime, mold, or debris from the internal drain channels.
Check sensor: Inspect the bottom tray sensor or float for dirt buildup. Clean and ensure free movement.

If P2 recurs quickly, a technician should inspect for internal leaks or sensor failure.

Medium 3/5

Bottom Tray Water Level Sensor

Check Price on Amazon

We may earn a commission from links on this page.