Electrolux Indoor Fan Non-Operation

Indoor unit fan does not run, but display and other functions appear normal

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed indoor fan motor, Faulty fan capacitor (on AC motors), Loose fan connector, Faulty indoor PCB fan driver

Safety: Disconnect power before accessing the fan.

Steps:

Mode check: Ensure the unit is not in a mode where the fan is intentionally off (e.g., some defrost or preheat modes).
Inspect wiring: Reseat the fan motor connector on the PCB.
Spin test: Try to rotate the blower by hand. If stiff, the motor is likely seized.
Replace motor/capacitor: On non-inverter models, replace the fan capacitor first. If no improvement, replace the indoor fan motor.

Hard 4/5

Indoor Fan Motor

Check Price on Amazon

We may earn a commission from links on this page.