Haier
Short Cycling / Control or Capacity Mismatch
Unit frequently turns on and off (short cycling) without reaching set temperature.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Oversized AC for room size, Dirty filters or coils causing incorrect sensor readings, Faulty room temperature sensor, Poor thermostat placement (for ducted systems)
How to Fix / Troubleshooting
Safety first: Turn off power before accessing sensors or coils.
- Clean filters and coils: Ensure airflow is not restricted, which can cause rapid temperature swings at the sensor.
- Check sensor position: Verify the room sensor is not directly in the cold air stream; reposition if possible so it senses average room air.
- Adjust setpoint and fan speed: Use a moderate set temperature and continuous fan mode to reduce cycling.
- If problem persists: A technician should test the room sensor and control logic; in some cases, system resizing may be necessary.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Indoor Ambient Temperature Sensor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements