Keystone Short Cycling / Improper Control

Keystone air conditioner cycles on and off rapidly (short cycling) without adequately cooling the room.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Thermostat sensor too close to cold air outlet, oversized unit for room, control board logic fault, low refrigerant causing overload trips

How to Fix / Troubleshooting

Steps:

  • Sensor placement: Locate the room temperature sensor and ensure it is not directly in the cold air stream. Reposition slightly into the return air path if possible.
  • Check setpoint: Avoid setting the temperature extremely low; use a moderate setpoint to reduce rapid cycling.
  • Room size: If the unit is significantly oversized for the room, consider using a lower fan speed or a smaller unit to avoid short cycles.
  • Professional check: If cycling is accompanied by clicking from overloads or EC-type errors, have a technician check refrigerant charge and compressor health.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Room Temperature Sensor or Main Control Board
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements