H5
Klarstein IPM / Inverter Module Protection (Inverter Models)

Display shows H5 and unit may not start or may shut down shortly after starting.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Overcurrent or overtemperature in inverter module, shorted compressor windings, blocked condenser, defective inverter PCB

How to Fix / Troubleshooting

Critical safety: Inverter circuits store high voltage even after power is removed. Do not touch inverter components unless you are trained and have verified capacitors are discharged.

User-level checks:

  • Power reset: Turn off power at the breaker for at least 15 minutes, then restore and test.
  • Airflow: Ensure condenser is clean and fan is working properly.

Technician-level checks:

  • Compressor windings: Measure resistance and insulation to ground. Replace compressor if shorted.
  • Inverter PCB: Inspect for burnt components. Replace the inverter module/PCB if defective.

Due to the risk of electric shock, H5 faults should generally be handled by a qualified technician.

Advertisements

Repair Difficulty

Professional Required 5/5

Required Part

Inverter Power Module / Outdoor PCB
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements