Water dripping from the indoor unit front panel or onto the wall/floor

Safety first: Turn off the unit and power at the breaker to avoid electrical hazards from water.

Steps:

• Check filters and coil: Clean dirty filters and coils to reduce icing and excessive condensate.
• Clear drain line: Access the drain outlet and use a wet/dry vacuum or compressed air to clear blockages. Ensure the drain hose slopes downward continuously with no upward loops.
• Inspect drain pan: Remove the front cover and check the drain pan for cracks or misalignment. Reseat or replace if damaged.
• Check unit level: Verify the indoor unit is slightly tilted toward the drain side as per installation instructions.