Whirlpool Indoor Fan Failure

Unit's fan does not run, but the compressor appears to start; coil may freeze or unit may shut down.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Failed indoor fan motor, open fan capacitor, loose wiring, blocked blower wheel, defective fan relay on control board

How to Fix / Troubleshooting

Safety: Unplug the unit before accessing the blower or electrical components.

Steps:

  • Check for obstructions: Remove the front cover and ensure nothing is blocking the blower wheel.
  • Spin test: Try spinning the blower by hand. If stiff, the motor may be seized and require replacement.
  • Capacitor: Locate and inspect the fan capacitor (if separate). Replace if bulged or leaking.
  • Wiring: Verify that the fan motor wires are securely connected.

If the fan still does not run, the motor or control board is likely defective and should be replaced by a technician.

Advertisements

Repair Difficulty

Hard 4/5

Required Part

Indoor Fan Motor / Fan Capacitor
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements