AEG
Intermittent Power Loss / Thermal Cut-Out Activation
AEG air fryer shuts off mid-cycle and restarts or remains off without any error code.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Overheating causing thermal cut-out to trip, Loose mains plug or internal connector, Faulty main power switch, Failing main control board
How to Fix / Troubleshooting
Safety first: Unplug before opening the unit. Allow it to cool if it has been running.
Steps to diagnose:
- Check ventilation and load: Ensure vents are clear and the basket is not overloaded. Overheating can trigger internal protection.
- Inspect plug and socket: Wiggle the plug gently in the outlet (with power off) to check for looseness. Try a different outlet.
- Internal connections: Open the housing and inspect all mains and low-voltage connectors for looseness or signs of arcing. Reseat and secure them.
- Thermal cut-out: Locate the thermal cut-out on the heater housing. If it is a self-resetting type, frequent tripping indicates overheating; clean vents and check fan operation. If it is a one-shot type and open, replace it.
- Board fault: If power loss persists despite good connections and cooling, the main control board may have an intermittent fault and should be replaced.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Thermal Cut-Out
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements