Air fryer runs but does not heat; fan operates normally and timer counts down.

Safety first: Unplug and let the unit cool. Heating components are high‑wattage and can cause shock if mishandled.

Steps:

• 1. Confirm no heat: After 5 minutes of operation at maximum temperature, carefully feel near the exhaust vents. If still cool, the heater is not energizing.
• 2. Visual inspection: Look at the heating element through the guard. Check for breaks or burn spots.
• 3. Access heater: Remove the cover to expose the heating element assembly. Inspect wiring and terminals for burning or looseness.
• 4. Test element: Disconnect one terminal and measure resistance. An open circuit indicates a failed element that must be replaced.
• 5. Control board: If the element is good, inspect the heater relay on the control board for damage. Board replacement is typically required.