Breville Display Backlight / LCD Failure

Display is very dim, flickering, or completely blank while the unit still heats and runs.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed display backlight LEDs, Loose display connector, Faulty display driver on main board, Cracked display module

Safety first: Unplug the unit before disassembly.

Check brightness settings: Some models allow dimming; verify the brightness is not set to minimum.
Inspect display connector: Access the display module and reseat its connector on the control board.
Look for damage: Check the display for cracks or moisture. Replace the display/control panel assembly if damaged.
Board vs. display: If the display module is known good but remains dim or blank, the main control board display driver may have failed and require replacement.

Medium 3/5

Display Module / Control Panel Assembly

Check Price on Amazon

We may earn a commission from links on this page.