Unit shuts off mid-cycle and restarts or loses settings randomly.

Safety first: Unplug before internal inspection.

• Step 1 – Check plug fit: Ensure the plug fits snugly in the outlet. Avoid using loose extension cords or power strips.
• Step 2 – Inspect cord strain relief: Wiggle the cord gently where it enters the unit; if power cuts in and out, the cord or internal connections may be loose.
• Step 3 – Open housing: Access the main control board and inspect all connectors. Reseat any that appear loose.
• Step 4 – Look for heat damage: Check for browned areas or cracked solder joints on the board, especially around the power supply section. Replace the board if damage is found.
• Step 5 – Ventilation: Ensure vents are clear so the control area does not overheat, which can cause resets.