Electrolux Timer / Clock Calibration Fault

Timer counts down too fast or too slow; cooking times are inaccurate.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Faulty oscillator on main PCB, Firmware bug, Power supply instability, Control PCB damage

Safety first: Unplug before internal inspection.

Steps:

Factory reset: Perform a reset according to the user manual to clear any software glitches.
Power stability: Avoid using long extension cords or sharing the outlet with high-load appliances that may cause voltage dips.
Board inspection: Check the main PCB for corrosion or damage around the timing/oscillator components. If present, replace the board.
Workaround: Until repaired, use an external kitchen timer to monitor cooking times more accurately.

Hard 4/5

Main Control PCB

Check Price on Amazon

We may earn a commission from links on this page.