Air fryer powers on but immediately shuts off or will not start when the basket is inserted.

Safety: Unplug the air fryer before inspecting the basket mechanism.

Steps to resolve basket detection issues:

• Inspect basket fit: Ensure the basket and pan are correctly oriented and fully inserted. Check for bent metal or warped plastic that prevents full insertion.
• Check actuator tab: Look inside the front opening for a small plastic tab or protrusion that contacts the internal switch. If broken or worn, the switch may not be engaged.
• Access the switch: Remove the bottom cover to locate the basket safety microswitch near the front of the unit.
• Test the switch: Manually press the switch lever and listen for a click. Use a multimeter to verify continuity changes when pressed. Replace the switch if it fails.
• Adjust alignment: Slightly bend the metal bracket holding the switch (if present) so that the basket actuator reliably presses the switch when fully inserted.

Tip: Avoid overloading or forcing the basket, as this can bend rails and misalign the actuator.