Air fryer does not power on at all; no lights or display

Shock Hazard: Always unplug the unit before opening any panels. Do not attempt internal repairs if you are not comfortable working around mains voltage.

• Step 1 – Check outlet and breaker: Test the wall outlet with another appliance. Reset any tripped breakers or GFCI outlets.
• Step 2 – Inspect power cord: Examine the Frigidaire air fryer cord for cuts, burns, or loose prongs. If damaged, replace the cord; do not use tape or temporary fixes.
• Step 3 – Try a different outlet: Plug the air fryer directly into a known‑good outlet without an extension cord or power strip.
• Step 4 – Internal fuse check: If still dead, unplug the unit and remove the rear or bottom cover. Locate the internal fuse (often near the power entry). Test it with a multimeter; if blown, replace it with the same rating after verifying there are no shorts in the heater or wiring.
• Step 5 – Terminal block and wiring: Confirm that the power cord wires are securely fastened to the internal terminal block and that no wires are loose or burnt.
• Step 6 – Control board: If the fuse and wiring are good but the unit remains dead, the main control board is likely faulty and should be replaced.