Gorenje
General Protection / Safety Lockout
Air fryer beeps repeatedly and will not start; display may flash but no code is shown.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Basket not detected, Overtemperature lockout, Internal self-test failure, Stuck key on touch panel, Low supply voltage
How to Fix / Troubleshooting
Safety first: Unplug before internal checks.
- Reset: Unplug for 10 minutes, then plug back in. Try a simple manual temperature/time setting instead of a preset.
- Basket and door: Remove and reinsert the basket firmly. Check the basket detection microswitch for proper operation.
- Panel keys: Ensure no button is physically stuck or pressed in. Clean the touch surface.
- Overheat history: If the unit was recently overheated, allow extended cooling time and check the thermal cut-out and sensor.
- Board replacement: If repeated beeping persists with no clear cause, the main control board may have an internal fault and should be replaced.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Main Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements