Insignia
Noisy Convection Fan / Fan Bearing Wear
Air fryer fan is very loud, rattling, or grinding during operation.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn fan motor bearings, Loose fan blade on shaft, Debris contacting fan blades, Bent fan guard
How to Fix / Troubleshooting
Safety first: Unplug the air fryer before reaching near the fan or opening the housing.
Steps to reduce fan noise:
- 1. Inspect from inside: Remove the basket and look up at the fan guard. Check for loose screws, warped guards, or debris stuck in the blades.
- 2. Clean fan area: Use a soft brush to remove grease and crumbs from the fan guard and visible parts of the blades.
- 3. Access fan assembly: Remove the top or rear cover to reach the fan motor and blade.
- 4. Check blade tightness: Ensure the fan blade nut or screw is tight on the motor shaft. Tighten carefully without over-torquing.
- 5. Spin test: Rotate the fan by hand. If it feels rough, wobbles, or makes scraping sounds, the motor bearings may be worn.
- 6. Replace fan motor: If bearings are noisy, install a new Insignia convection fan motor and transfer the blade if necessary.
Warning: Do not bend the fan blades by hand; imbalance can cause further noise and vibration.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Convection Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements