Insignia
Erratic Temperature Control
Air fryer fan runs but heater cycles on and off rapidly, causing unstable temperature.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose NTC sensor connection, Intermittent thermal fuse or thermostat, Failing main control board temperature circuit, Sensor wire damaged by heat
How to Fix / Troubleshooting
Safety first: Unplug and cool the unit before internal checks.
Steps to stabilize temperature control:
- 1. Inspect sensor wiring: Access the NTC sensor and follow its wires to the board. Ensure connectors are tight and wires are not brittle or burned.
- 2. Test thermal devices: Check the thermal fuse and any thermostats for solid continuity. Replace any that show intermittent readings when gently moved.
- 3. Replace NTC sensor: If the sensor shows unstable resistance when stationary, install a new Insignia-compatible sensor.
- 4. Replace main control board: If all sensors and fuses are good but the heater still cycles erratically, the control board's temperature control circuit may be defective and should be replaced.
Warning: Unstable temperatures can affect cooking safety and may indicate impending component failure.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
NTC Temperature Sensor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements