Kalorik
Display Module / Power Supply Degradation
Air fryer display is dim, flickering, or segments are missing.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failing display PCB, Loose display ribbon cable, Weak low-voltage supply on control board, Heat-damaged LEDs or LCD segments
How to Fix / Troubleshooting
Safety first: Unplug the air fryer before opening the control panel area.
Steps to address display issues:
- Check power source: Try a different outlet to rule out low line voltage.
- Access display board: Remove the front bezel or top cover to reach the display PCB. Carefully note screw locations and any clips.
- Inspect connectors: Reseat any ribbon cables or multi-pin connectors between the display and main control board.
- Look for heat damage: Check the display board for darkened areas, cracked solder joints, or burnt components, especially near voltage regulators or LED drivers.
- Replace display/control assembly: On many Kalorik models, the display and control electronics are integrated. Replace the Kalorik control/display PCB assembly if the display remains dim or incomplete.
Display issues alone usually do not affect safety, but they can make operation difficult; replace the module for reliable use.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Control/Display PCB Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements