Kenwood
Insulation / Heat Shield Degradation
Exterior of the air fryer becomes excessively hot to touch during operation.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Missing or damaged internal heat shield, Insulation pad displaced, Blocked ventilation causing heat soak, Continuous operation at maximum temperature
How to Fix / Troubleshooting
Safety: If the exterior is too hot to touch comfortably, unplug and allow to cool. Keep away from children.
- Ventilation: Ensure adequate clearance around the unit and that vents are not blocked.
- Inspect shields: Open the housing and check that reflective heat shields and insulation pads are in place and not damaged or collapsed.
- Replace damaged parts: Replace any burnt or missing heat shields/insulation with genuine parts rated for high temperature.
- Usage pattern: Avoid running back‑to‑back cycles at maximum temperature without a short cool‑down period.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Internal Heat Shield / Insulation
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements