Klarstein
Cavity Lamp Failure
Interior light (on models equipped) does not turn on, but the fryer otherwise works.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Burned-out LED or bulb, Loose lamp connector, Failed lamp driver on control board, Broken lamp wiring
How to Fix / Troubleshooting
Safety first: Unplug the fryer and allow it to cool before accessing the lamp area.
Steps:
- 1. Check settings: Some Klarstein models allow turning the light on/off separately. Ensure it is enabled.
- 2. Access lamp: Remove the inner lamp cover (if present) and inspect the LED module or bulb.
- 3. Test lamp: If possible, test the lamp module with a suitable low-voltage source. Replace if it does not light.
- 4. Inspect wiring: Trace the lamp wires back to the control board and ensure connectors are secure.
- 5. Replace driver/board: If the lamp is good but never receives power, the lamp driver on the control board may be faulty. Replace the main control PCB.
Warning: Use only manufacturer-approved lamp modules; incorrect replacements can overheat.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Cavity Lamp Module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements