Morphy Richards
No Power / Dead Appliance
Air fryer does not power on at all; no lights, no beeps.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blown internal fuse on PCB, Faulty mains power cord, Failed main control PCB, Loose live/neutral connections at input terminal block
How to Fix / Troubleshooting
Safety first: Unplug from the wall before any disassembly. If you are not comfortable working with mains wiring, contact a qualified technician.
- External checks: Confirm the wall socket works by testing another appliance. Check the Morphy Richards plug and cord for cuts, kinks, or burn marks.
- Access input wiring: Remove the rear or bottom cover to reach the mains input terminal block and internal fuse. Tighten any loose screw terminals.
- Test internal fuse: Locate the inline or PCB‑mounted fuse. Test for continuity; if blown, replace with the exact same rating. If it blows again immediately, there is a short that must be found before further use.
- Inspect main PCB: Look for burnt components or cracked solder joints in the power supply section. If the board shows damage or still does not power up after fuse and cord checks, replace the main control PCB.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Main Control PCB
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements