Safety first: Unplug the unit. Internal fan blades can be sharp; wear cut‑resistant gloves.

Check for obstructions: Remove the basket and look up toward the fan guard. Use a torch to inspect for food debris, foil, or warped plastic touching the fan. Remove any obstruction carefully.
Spin test: With the unit unplugged, gently spin the fan through the guard using a non‑metallic tool. It should rotate freely. If stiff or grinding, the motor bearings may be worn; replace the fan motor assembly.
Access motor: Remove the top cover to expose the fan motor. Check that mounting screws are tight and the fan is not rubbing on the shroud.
Electrical test: Measure resistance across the motor terminals. An open circuit indicates a failed motor. Replace the fan motor assembly specific to your Morphy Richards model.
PCB driver: If the motor tests good but never receives voltage when a program starts, the fan driver circuit on the main PCB may be defective. Replace the main control PCB.

E6 is displayed and the fan does not run or stops unexpectedly.

Possible Causes