Ninja
Unresponsive Touch Controls
Display works but some buttons do not respond or require very hard presses.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn touch membrane, Moisture under panel, Loose ribbon cable, Cracked control PCB
How to Fix / Troubleshooting
Safety first: Unplug the unit before removing any control panel components.
- Step 1 – Clean panel: Wipe the control panel with a soft, slightly damp cloth and then dry thoroughly. Remove grease or residue that may interfere with touch sensitivity.
- Step 2 – Power reset: Unplug for 5–10 minutes, then plug back in and test.
- Step 3 – Drying period: If the panel was exposed to steam or spills, allow the unit to dry in a warm, dry room for 24 hours.
- Step 4 – Internal inspection (advanced): Remove the control panel cover and check the ribbon cable connection between the touch panel and control board. Reseat if loose.
- Step 5 – Replace touch panel: If specific buttons consistently fail, replace the touch panel or UI board as a complete assembly.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Touch Control Panel
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements