E12 error appears intermittently; unit may stop mid-cycle and then restart after cooling.

Safety first: Unplug and allow the unit to cool fully before cleaning or inspection.

• Step 1 – Improve ventilation: Ensure the air fryer is on a hard, flat surface with at least 5 inches (12 cm) of clearance on all sides and above. Do not operate under low cabinets where heat can accumulate.
• Step 2 – Clean vents: Use a soft brush and vacuum to clean the rear and bottom vents. Remove dust, pet hair, and grease.
• Step 3 – Clean interior surfaces: Remove the basket and pan. Wipe the interior walls, especially near the heating element and temperature sensor, to remove grease that can trap heat.
• Step 4 – Check fan operation: During a test cycle, listen for steady fan noise. If the fan speed fluctuates or stops, the fan motor may be failing and causing hot spots.
• Step 5 – Professional evaluation: If E12 continues after thorough cleaning and ensuring good airflow, the high-limit thermostat or fan motor may need replacement.