Nuwave
Display Segment Failure
Nuwave air fryer display shows random characters or segments; numbers are incomplete or unreadable.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose display connector, failing LED/LCD display module, damaged traces on display board, control board driver fault
How to Fix / Troubleshooting
Safety First: Unplug the unit before removing the control panel.
Step-by-step checks:
- Power reset: Unplug for 10 minutes, then plug back in to see if the display normalizes.
- Inspect display lens: Clean the outside of the display window; sometimes grease or condensation can obscure segments.
- Reseat connectors (advanced): Remove the control panel and reseat the connector between the display module and the main/control board.
- Replace display board: If segments remain missing or random, replace the display/control board assembly. If the display is integrated into the main board, replace the main control board.
Note: While the unit may still function, an unreadable display makes safe operation difficult.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Display / Touch Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements