Nuwave air fryer trips the household circuit breaker or GFCI outlet when turned on.

Safety First: Do not repeatedly reset a breaker that trips immediately; this indicates a potentially dangerous fault. Unplug the air fryer before inspection.

Step-by-step checks:

• Try another outlet: Plug the unit into a different non-GFCI outlet on a separate circuit to rule out a weak breaker. If it still trips, the fault is in the air fryer.
• Inspect cord: Check the Nuwave power cord for cuts, crushed sections, or exposed conductors. Replace the cord set if damaged.
• Check for moisture: If the unit was recently washed or exposed to heavy steam, allow it to dry in a warm, dry place for 24–48 hours, then retest.
• Internal inspection (advanced): With the unit unplugged and cover removed, inspect the heating element, wiring, and control board for signs of arcing, burn marks, or melted insulation.
• Insulation test: Using a multimeter, check for continuity between the heating element terminals and the metal chassis. Any continuity indicates a ground fault and the element must be replaced.
• Replace faulty parts: Replace a shorted heating element assembly, damaged wiring harness, or burnt main control board as needed.

Warning: Ground faults and shorts can cause fire or electric shock. If you are not experienced with electrical testing, seek professional service.