Oster Thermal Overload / Overheating Shutdown

Oster air fryer display and fan shut off suddenly during cooking and the unit will not turn back on until it cools.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Blocked ventilation openings, Failed or weak thermal cutoff, Fan motor slowing or stopping under heat, Excessive grease buildup restricting airflow

How to Fix / Troubleshooting

Safety: Allow the fryer to cool completely before further use. Do not cover vents during operation.

  • Improve ventilation: Move the fryer to an open area with at least 5 inches (12 cm) clearance on all sides and above. Do not operate under low cabinets.
  • Clean thoroughly: Remove the basket and tray. Clean grease from the interior walls, heater guard, and especially around the fan intake and exhaust vents.
  • Check fan performance: During operation, ensure the fan runs at a consistent speed. If it slows or stops intermittently, the motor may be overheating and should be replaced.
  • Inspect thermal cutoff (advanced): Access the heater assembly and locate the thermal fuse. If it is partially failing, it may open at lower-than-designed temperatures. Test and replace with an Oster-specified part if necessary.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Thermal Fuse
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements