Philips No Power / Dead Appliance

Air fryer does not power on at all; no lights or display when plugged in.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Blown internal fuse on main board, Faulty power cord, Failed main control board power supply, Defective mains switch (if equipped)

How to Fix / Troubleshooting

Safety first: Unplug the unit before any inspection. Do not attempt to bypass fuses.

Steps:

  • Outlet and cord: Test the wall outlet with another device. Inspect the Philips power cord for damage and replace if any cuts or burns are visible.
  • Check mains switch: If your model has a physical on/off switch, test it for continuity when switched on. Replace if open.
  • Internal fuse: Open the housing and locate the fuse on the main control board (often a glass or ceramic fuse). Test for continuity. If blown, investigate for shorts before replacing with the same rating.
  • Board inspection: Look for burned components or bulging capacitors in the power supply section. If present, replace the main control board.

Warning: Repeatedly replacing a blowing fuse without finding the root cause is dangerous. Seek professional help if the new fuse blows immediately.

Advertisements

Repair Difficulty

Hard 4/5

Required Part

Main Control Board Fuse
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements