E10
Philips
Wi‑Fi Module / Connectivity Error
Display shows E10; Wi‑Fi or app connectivity features do not work on connected Philips air fryer models.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Faulty Wi‑Fi module daughterboard, Loose Wi‑Fi antenna connection, Firmware incompatibility, Damaged communication bus between Wi‑Fi module and main MCU
How to Fix / Troubleshooting
Safety first: Disconnect from mains before opening the unit.
Steps:
- Software reset: Use the settings menu to reset network settings. Power cycle the unit and reattempt pairing with the Philips app.
- Network check: Ensure your router is within range and using a supported band (typically 2.4 GHz). Avoid guest networks or captive portals.
- Inspect Wi‑Fi module: Open the housing and locate the small Wi‑Fi module board (often near the control panel). Check that it is firmly seated and that any antenna wire is connected.
- Module replacement: If the module is physically damaged or E10 persists despite resets, replace the Wi‑Fi module or the entire control board assembly, depending on design.
Warning: Do not modify or replace the Wi‑Fi antenna with non-original parts; this may violate regulatory approvals.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements