PowerXL Control Panel Button Failure

Buttons on the control panel are unresponsive or require very hard presses.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Worn or damaged touch membrane, Cracked PCB under buttons, Moisture ingress into control panel, Loose ribbon cable to main board

Safety first: Unplug the unit before opening the control panel.

Steps:

Dry the panel: If moisture is suspected, unplug and let the unit dry in a warm, dry area for 24 hours.
Access panel: Remove screws securing the control panel to inspect the touch PCB.
Check cable: Reseat the ribbon cable between the panel and main board.
Inspect for damage: Look for cracks or corrosion on the PCB. If present, replace the control panel PCB.

Medium 3/5

Control Panel / Touchpad PCB

Check Price on Amazon

We may earn a commission from links on this page.