Pro Breeze Low Voltage to Display / Power Supply Instability

Display is very dim or flickers while the air fryer is running.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Weak household supply or overloaded circuit, Failing control board power supply, Loose display connector, Heat‑stressed capacitors on PCB

How to Fix / Troubleshooting

Safety first: Unplug the unit before opening the housing. Avoid touching capacitors immediately after unplugging; they may hold charge.

Steps to correct dim or flickering display:

  • Check outlet load: Avoid running the air fryer on the same circuit as other high‑power appliances (kettle, microwave). Try a different outlet.
  • Inspect display cable: Remove the front/top cover and reseat the display ribbon cable on both the display and main PCB.
  • Board inspection: Look for bulging or leaking capacitors on the control PCB. If present, replace the board.
  • Replace display module: If only the display is affected and the rest of the unit works normally, replace the LED/LCD display module if available separately.

Warning: Persistent flickering may precede complete board failure; address promptly.

Advertisements

Repair Difficulty

Hard 4/5

Required Part

Main Control PCB
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements