Russell Hobbs
Timer Mechanism Wear / Contamination
Mechanical timer knob (on analogue models) does not turn smoothly or sticks.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Grease or food ingress into timer, Worn timer gears, Damaged timer shaft
How to Fix / Troubleshooting
Safety: Unplug the appliance before working on the timer.
- Clean exterior: Wipe around the timer knob to remove grease and debris.
- Remove knob: Gently pull the knob straight off the shaft. Clean the shaft area.
- Access timer: Remove the control panel cover to expose the mechanical timer.
- Inspect for contamination: If grease has entered the timer, replacement is recommended; internal cleaning is difficult.
- Replace timer: Disconnect wiring (noting positions), remove mounting screws, and fit a new timer switch compatible with your Russell Hobbs model.
- Reassemble and test: Refit knob and panel, then test for smooth operation.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Mechanical Timer Switch
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements