Sage
Display backlight or power rail instability
Display is very dim or flickers during operation.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failing display backlight LEDs, Loose display connector, Weak low‑voltage regulator on control PCB, Excessive heat near control panel
How to Fix / Troubleshooting
Safety first: Unplug before accessing the control panel.
- Check ambient lighting: Confirm the dimness is not just due to bright ambient light. Compare brightness at startup and after warm‑up.
- Inspect connectors: Remove the panel and reseat the display connector on the UI or main board.
- Heat management: Ensure vents around the control panel are not blocked, as heat can shorten LED life.
- Replace display/UI: If the display remains dim or flickers despite solid connections, replace the display or entire UI panel assembly as supplied by Sage.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Display Module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements