SilverCrest Insulation or airflow deficiency

Air fryer exterior becomes excessively hot to touch during normal operation.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Blocked ventilation openings, Failed internal insulation shield, Fan not running at full speed, Unit placed too close to walls or other appliances

How to Fix / Troubleshooting

Safety first: Avoid touching hot surfaces; use handles only. Unplug and cool before inspection.

Steps to reduce exterior temperature:

  • Improve placement: Ensure at least 10–15 cm clearance on all sides and above the unit. Do not operate under low cabinets.
  • Clean vents: Remove dust and grease from all external vents with a soft brush and vacuum.
  • Check fan operation: Confirm that the convection fan runs strongly during cooking. If weak or intermittent, see fan motor troubleshooting.
  • Inspect internal shields: Open the housing and verify that any reflective or insulating shields around the cooking chamber are intact and properly positioned.
  • Replace damaged shields: Replace any warped or missing heat shield panels specific to your SilverCrest model.

Note: Some warmth on the exterior is normal, but surfaces should not be dangerously hot under normal use.

Advertisements

Repair Difficulty

Medium 3/5

Required Part

Internal Heat Shield Panels
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements