SilverCrest
Start command not recognized / user interface fault
Air fryer powers on but will not start cooking when pressing the start button; no error code displayed.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Faulty start/pause button on touch panel, Loose ribbon cable to control PCB, Firmware glitch, Basket not detected by safety switch
How to Fix / Troubleshooting
Safety first: Disconnect power before removing any covers.
Steps to troubleshoot:
- Confirm settings: Ensure a temperature and time are selected. Some SilverCrest models require pressing a specific start icon after program selection.
- Check basket insertion: Remove and firmly reinsert the basket until it clicks. The basket detection microswitch must be engaged.
- Panel reset: Unplug the unit for 10 minutes, then reconnect and try again.
- Inspect touch panel: If other buttons work but start does not, the touch control PCB may have a failed key area. Access the panel and check the ribbon cable connection to the main PCB.
- Replace panel or switch: Replace the touch control panel if the start button area is unresponsive. If the basket switch is not closing, replace the basket detection microswitch.
Note: Some models will not start if the set temperature is below the minimum or if the timer is at 0; verify user settings.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Touch Control Panel PCB
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements