Sunbeam
LED Display / LCD Module Fault
Display is dim, flickering, or segments are missing.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Aging display backlight, Loose display connector, Failing display driver on UI PCB, Heat damage to display module
How to Fix / Troubleshooting
Safety: Unplug the unit before accessing the control panel.
Steps:
- 1. Check viewing angle: Some displays appear dim at extreme angles; verify from straight on.
- 2. Access display board: Remove the top or front housing to expose the display and UI PCB.
- 3. Reseat connectors: Gently disconnect and reconnect any ribbon cables or plugs going to the display.
- 4. Inspect for heat damage: Look for discoloration or warping around the display. If present, the module may need replacement.
- 5. Replace UI board: If reseating does not help and the display remains faulty, replace the user interface PCB or display module as supplied by Sunbeam.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Display / User Interface PCB
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements