Interior light (if equipped) does not turn on, but the unit otherwise works normally.

Safety: Unplug and allow the unit to cool. Glass lamps can be hot and fragile.

Steps:

• 1. Access lamp: Locate the lamp cover inside the cavity (if your Sunbeam model has one). Remove any screws or clips holding the cover.
• 2. Inspect lamp: Check if the filament is broken or the LED module is discolored. Replace with the correct type specified by Sunbeam.
• 3. Check socket: Ensure the lamp is seated firmly and that the socket wires are intact.
• 4. Driver circuit: If a new lamp does not work, the lamp driver on the PCB may be faulty; this typically requires PCB replacement.