E6
Tefal Fan Motor Fault / Tachometer Error

Air fryer displays E6 and shuts down, often when the fan fails to start or sounds abnormal.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Seized convection fan motor, Obstructed fan blades by food debris, Failed fan tachometer feedback sensor, Burnt fan driver circuit on PCB

How to Fix / Troubleshooting

Safety first: Unplug the unit and allow it to cool. Do not insert fingers or tools into the fan area while connected to power.

  • Listen for fan operation: When starting a cycle (before error appears), place your ear near the top or rear vents. If you do not hear the fan or hear grinding, suspect a fan issue.
  • Check for obstructions:
    • Remove basket and pan.
    • Look up toward the fan guard; use a flashlight to check for stuck food pieces, foil, or warped plastic touching the fan.
    • Gently dislodge debris with a wooden stick (never metal) while the unit is unplugged.
  • Manual spin test: If accessible, gently spin the fan blades by hand (with power disconnected). They should rotate freely without scraping.
  • Motor replacement: If the fan is stiff, noisy, or has excessive play, the fan motor assembly should be replaced. This typically involves removing the top cover, fan guard, and fan blade, then unbolting the motor.
  • PCB fault: If the fan spins freely but never runs, the motor or driver circuit on the PCB may be faulty and require professional diagnosis.
Advertisements

Repair Difficulty

Hard 4/5

Required Part

Convection Fan Motor Assembly
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements