Whirlpool Display Corruption / Segment Failure

Display shows random characters or scrambled segments, but unit may still heat.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Loose display ribbon cable, Damaged LCD/LED display module, Control board firmware corruption, Electrical noise or surge damage

Safety first: Disconnect power.

Connector check:

Access the display board and reseat the ribbon cable or connector from the main board.
Inspect for corrosion or bent pins; clean and straighten as needed.

Module and board:

If characters remain scrambled, replace the display/UI board.
If the problem persists with a new display, the main control board may have firmware or driver issues and should be replaced.

Medium 3/5

Display / UI Board

Check Price on Amazon

We may earn a commission from links on this page.