Danstoker
HMI / Control Panel Failure
Control panel buttons or HMI on the Danstoker boiler are unresponsive or intermittent.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn membrane keypad, Moisture ingress into panel, Loose ribbon cable or connector, Faulty HMI module
How to Fix / Troubleshooting
Safety: Isolate power before opening the control panel.
- Inspect panel: Check for signs of moisture, condensation, or corrosion inside the Danstoker control panel.
- Check connections: Reseat ribbon cables and connectors between the HMI and main controller.
- Dry and seal: If moisture is present, dry the panel and improve sealing or ventilation to prevent recurrence.
- Replace HMI: If keys remain unresponsive, replace the HMI or keypad assembly with a Danstoker-approved part.
After replacement, reload configuration if required and test all functions.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
HMI / Keypad Module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements