Kospel
User Interface Panel Failure
Boiler display is on but buttons or rotary controls do not respond
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Stuck or damaged buttons, Moisture ingress into control panel, Faulty interface PCB, Loose ribbon cable to main board
How to Fix / Troubleshooting
Safety first: Turn off power before removing the front panel or control panel.
Steps to check:
- Power cycle: Turn the boiler off for a few minutes and then back on to see if the interface recovers.
- Inspect panel: Check for signs of water or condensation on the display and buttons. Dry gently if damp.
- Check ribbon cable: Ensure the flat cable between the user interface and main board is fully seated and not damaged.
- Test buttons: Press each button individually to see if any are physically stuck. Do not use excessive force.
When to call a technician: Replacement of the user interface PCB should be done by an authorized Kospel service technician.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
User Interface / Control Panel PCB
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements